Unlike the 2019.1 updates that introduced new features in July, August, and September, our October releases primarily focus on bug fixes. Of note is the AutoCAD for Mac updates we see this month. With the recent release of macOS Mojave, the AutoCAD for Mac updates addresses compatibility issues with the updated operating system.
Also of note are updates to the various components to the Fabrication product line. In all, we see a dozen updates to that product line in October.
The following product families received updates in October:
AutoCAD
![AutoCAD Hero Image](http://www.caddmicrosystems.com/blog/2018/08/AutoCAD-Hero.jpg)
AutoCAD for Mac 2017.3 Update
- Released: October 8, 2018
- Severity: High
The 2017.3 Update fixed compatibility issues with macOS Mojave. It also improves overall stability of the product. This update can be installed on all AutoCAD/AutoCAD LT 2017 official releases and is recommended for all users. Please read the entire document before you apply the update to your product.
See the release notes for important information about the installation and contents of this update.
AutoCAD LT
![AutoCAD Hero Image](http://www.caddmicrosystems.com/blog/2018/08/AutoCAD-Hero.jpg)
AutoCAD LT for Mac 2017.3 Update
- Released: October 8, 2018
- Severity: High
The 2017.3 Update fixed compatibility issues with macOS Mojave. It also improves overall stability of the product. This update can be installed on all AutoCAD/AutoCAD LT 2017 official releases and is recommended for all users. Please read the entire document before you apply the update to your product.
See the release notes for important information about the installation and contents of this update.
Civil 3D
![](http://www.caddmicrosystems.com/blog/2018/04/Civil_3d.jpg)
DACH Extension for Autodesk Civil 3D 2019
- Released: October 19, 2018
- Severity: Medium
This will install the Autodesk DACH Extension for Civil 3D 2019. The Readme contains the latest information regarding the installation and the use of this extension. It is strongly recommended that you read the entire document before you apply this extension to your product.
See the release notes for important information about the installation and contents of this update.
Fabrication
![](http://www.caddmicrosystems.com/blog/2018/11/Fabrication-1024x576.jpg)
Fabrication Tracker 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication Tracker 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication Tracker 2018.3 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication Tracker 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes of the product.
See the release notes for important information about the installation and contents of this update.
Fabrication RemoteEntry 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication RemoteEntry 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication RemoteEntry 2018.3 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication RemoteEntry 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication ESTmep 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication ESTmep 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CAMduct Components 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CAMduct Components 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CAMduct Components 2018.3 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CAMduct Components 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CAMduct 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CAMduct Components 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CAMduct 2018.3 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CAMduct 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CADmep 2019.1 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CADmep 2019 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication CADmep 2018.3 Update
- Released: October 23, 2018
- Severity: Medium
This Update will bring Fabrication CADmep 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
Fabrication ESTmep 2018.3 Update
- Released: October 22, 2018
- Severity: Medium
This Update will bring Fabrication ESTmep 2018 for 64 bit Operating Systems up to the most current version, and includes the most recent fixes for your product.
See the release notes for important information about the installation and contents of this update.
InfraWorks
![Autodesk InfraWorks](http://www.caddmicrosystems.com/blog/2018/07/InfraWorks_Hero-1024x576.jpg)
Infrastructure Parts Editor 2019.1 Update
- Released: October 3, 2018
- Severity: Medium
Infrastructure Parts Editor for InfraWorks 2019.1. This installation is compatible with InfraWorks 2019 and Civil 3D 2019.
See the release notes for important information about the installation and contents of this update.
ReCap
![Autodesk ReCap](http://www.caddmicrosystems.com/blog/2018/07/ReCap_Hero-1024x576.jpg)
ReCap Pro 2019.3 Update
- Released: October 31, 2018
- Severity: Medium
This update contains many features, enhancements, and fixes to several major defects that were discovered since the previous version 5.0.2.41 including:
Fixes
- Fix issue where Faro raw scan cannot be colorized if there is space in raw scan file name.
- Fix issue where intensity is not exported in exported .rcs files.
- Fix issue where some points disappear after loading project with user defined coordinate system.
- Fix issue where application crashes on loading project with missing scans.
- Fix issue where application crashes when failing to load ReCap codec plugins.
- Fix issue where application crashes when registering partial E57 scan.
- Fix issue where application crashes during checkerboard target extraction.
Improvements
- Allow customer to set project CS if current project CS has not been set before.
- Support TLS1.2 for ReCap.
Changes
- Remove scan-to-mesh beta feature from ReCap.
- Remove project clean-up beta feature tool from ReCap.
See the release notes for important information about the installation and contents of this update.
Revit
![Autodesk Revit](http://www.caddmicrosystems.com/blog/2018/07/Revit_Architecture_Hero-1024x576.jpg)
Revit 2019.0.2 Security Fix
- Released: October 17, 2018
- Severity: High
This patch addresses customer reported issues and crashes, and contains the fixes included in the Revit 2019.0.1 Hot Fix. With this install, the following will be updated: Revit 2019 and Collaboration for Revit 2019. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit 2019 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 19.0.20.1.
See the release notes for important information about the installation and contents of this update.
Revit 2018.3.2 Security Fix
- Released: October 18, 2018
- Severity: High
This patch includes new functionality, addresses customer reported issues and crashes, and contains the fixes included in previous Revit 2018 patches. With this install the following will be updated: Revit 2018 and Collaboration for Revit 2018. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit 2018 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 18.3.2.7.
See the release notes for important information about the installation and contents of this update.
Revit 2018.0.3 Security Fix
- Released: October 18, 2018
- Severity: High
This patch addresses customer reported issues and crashes, and contains the fixes included in the Revit 2018.0.1 Hot Fix and the Revit 2018.0.2 Hot Fix. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit 2018 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 18.0.3.6.
See the release notes for important information about the installation and contents of this update.
Revit 2017.2.4 Security Fix
- Released: October 19, 2018
- Severity: High
This patch includes new functionality, addresses customer reported issues and crashes, and contains the fixes included in previous Revit 2017 patches. With this install, the following will be updated: Revit 2017, Collaboration for Revit 2017, and Personal Accelerator for Collaboration. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit 2017 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 17.0.1158.0.
See the release notes for important information about the installation and contents of this update.
Revit 2017.0.4 Security Fix
- Released: October 19, 2018
- Severity: High
This patch contains the fixes included in Revit 2017 Service Pack 1 and 2, as well as the Revit 2017.0.3 Security Fix. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit 2017 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 17.0.511.0.
See the release notes for important information about the installation and contents of this update.
Revit LT
![Autodesk Revit](http://www.caddmicrosystems.com/blog/2018/07/Revit_Architecture_Hero-1024x576.jpg)
Revit LT 2019.0.2 Security Fix
- Released: October 17, 2018
- Severity: High
This patch addresses customer reported issues and crashes and contains the fixes included in the Revit LT 2019.0.1 Hot Fix. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit LT 2019 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 19.0.20.1.
See the release notes for important information about the installation and contents of this update.
Revit LT 2018.3.2 Security Fix
- Released: October 18, 2018
- Severity: High
This patch includes new functionality, addresses customer reported issues and crashes and contains the fixes included in previous Revit LT 2018 patches. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit LT 2018 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 18.3.2.7.
See the release notes for important information about the installation and contents of this update.
Revit LT 2018.0.3 Security Fix
- Released: October 18, 2018
- Severity: High
This patch addresses customer reported issues and crashes, and contains the fixes included in the Revit LT 2018.0.1 Hot Fix and the Revit LT 2018.0.2 Hot Fix. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit LT 2018 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 18.0.3.6.
See the release notes for important information about the installation and contents of this update.
Revit LT 2017.2.4 Security Fix
- Released: October 18, 2018
- Severity: High
This patch addresses customer reported issues and crashes and contains the fixes included in previous Revit LT 2017 patches. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit LT 2017 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 17.0.1158.0.
See the release notes for important information about the installation and contents of this update.
Revit LT 2017.0.4 Security Fix
- Released: October 29, 2018
- Severity: High
This patch contains the fixes included in Revit LT 2017 Service Pack 1 and 2, as well as the Revit LT 2017.0.3 Security Fix. Consult the release notes for areas improved and issues addressed by this patch, which can be applied to Autodesk Revit LT 2017 running on all supported operating systems and languages. After this patch is applied successfully, the build number specified in the Help > About dialog will be 17.0.511.0.
See the release notes for important information about the installation and contents of this update.